AlliedTelesis AT系機器初期化方法

アライドテレシス社 x230-10GP を初めて利用．Ciscoライクなコマンドが扱いやすい．
初期化方法が変更になっていたためメモ．

■まっとうな方法

1. 強制初期化
   atmf cleanup
2. 通常初期化(Cisco write erase と同様)
   erase startup-config

■パスワードが分からない場合

コンソールを利用．再起動後[Ctrl+B]-[5]-[1]-[0]-[9]

以下コンソール上のログ

Bootloader 3.0.7 loaded
Press <Ctrl+B> for the Boot Menu

Boot Menu:

WARNING: The bootloader is not currently password protected.
——————————————————
B. Boot backup software
——————————————————
S. Security Level
——————————————————
0. Restart
1. Perform one-off boot from alternate source
2. Change the default boot source (for advanced users)
3. Update Bootloader
4. Adjust the console baud rate
5. Special boot options
6. System information
7. Restore Bootloader factory settings
——————————————————
9. Quit and continue booting

Enter selection ==> 5

Special boot options menu:

0. Return to previous menu
——————————————————
1. Skip startup script (Use system defaults)

Enter selection ==> 1

Option successfully set. Press 0 then 9 to boot with the default configuration
Or boot the system from an alternate source.

Special boot options menu:

0. Return to previous menu
——————————————————
1. Skip startup script (Use system defaults)

Enter selection ==> 0

Boot Menu:

WARNING: The bootloader is not currently password protected.
——————————————————
B. Boot backup software
——————————————————
S. Security Level
——————————————————
0. Restart
1. Perform one-off boot from alternate source
2. Change the default boot source (for advanced users)
3. Update Bootloader
4. Adjust the console baud rate
5. Special boot options
6. System information
7. Restore Bootloader factory settings
——————————————————
9. Quit and continue booting

Enter selection ==> 9

Posted in ネットワーク, ハードウェア